Abu Dhabi — Estidama & IEQ

Estidama, Energy and Indoor Environmental Quality — One Evidence Base

For Abu Dhabi developers, facilities managers and MEP consultants: stop assembling Pearl Rating evidence, ventilation data and energy analysis in separate documents. Build one traceable evidence base that serves all three.

Estidama Pearl credits, IAQ/ventilation performance and HVAC energy are engineering trade-offs of the same systems. Assessing them together avoids the common failure mode where a ventilation change fixes comfort but silently inflates cooling energy.

Built forAbu Dhabi developersFacilities managersMEP consultantsNew build & existing assets

What the analysis covers

Pearl Rating evidence map

Your existing documentation mapped against Estidama Pearl credit requirements, with gaps flagged.

Ventilation & IAQ analysis

Ventilation rates and indoor environmental quality indicators assessed against recognised design standards.

Thermal comfort

Comfort conditions evaluated alongside the energy cost of achieving them.

HVAC energy trade-offs

The energy consequences of ventilation and comfort decisions, quantified by physics-based calculation.

Ranked retrofit measures

Interventions ranked by indicative capex, payback and IEQ benefit.

Audit-ready provenance

Every finding linked to its evidence — the format assessors and clients expect.

What you upload

  • Utility bills and basic building details
  • Ventilation / IAQ measurements or BMS data if held
  • Existing Estidama, audit or commissioning documents

What you receive

  • Estidama & IEQ readiness assessment with gap register
  • Ventilation and comfort findings with energy trade-offs
  • Ranked measures with indicative capex and payback
  • A single evidence base reusable across certification, IAQ and energy work

Turnaround is rapid and depends on the completeness of the data you share.

See a real output first

Every figure in an Intelli-BuildAI report links back to its input evidence and the standard it was calculated against. Review a sample before you share any data.

Referenced against recognised standards & regional frameworks

Estidama Pearl Rating SystemASHRAE 62.1ASHRAE 55CIBSE TM40WELL (contextual)IPMVP

Transparent methodology

Outputs are produced by deterministic, physics-based calculation engines referenced to published standards, with data provenance recorded per input. Where inputs are incomplete, results are clearly marked indicative pending validation — no figure is presented as verified until the underlying evidence supports it.

Frequently asked questions

Does this replace an Estidama assessor?

No. It prepares and organises the engineering evidence — energy, ventilation, comfort — that assessments draw on, and flags gaps early so the formal process runs faster.

Do you make health claims about IAQ improvements?

No. We report measured and modelled indoor environmental quality indicators against recognised design standards. We do not claim specific health or productivity outcomes.

Can this run on an occupied, existing building?

Yes. Existing buildings are the primary use case — utility data, BMS exports and spot measurements are combined into one assessment without disrupting operations.

How does IEQ interact with energy cost?

Increased ventilation generally raises cooling energy in the Gulf climate. The analysis quantifies that trade-off so you can select interventions that improve IEQ at the lowest energy penalty.

Start with one building.

Share a few details and we will confirm scope, evidence needs and next steps — or start a free scan right away.

No spam. Your details are used only to respond to this request.

© Intelli-BuildAI by OAIRO. Assessment outputs are indicative and subject to data quality.